×
Follow Us
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 32

NETA 4 Exam Questions 1/2017

 Jump to latest post
Page 3 of 4 FirstFirst 1234 LastLast
    #21
  1. Bespey is offline Junior Member
    Join Date
    Jan 2015
    Posts
    12
    Reputation
    Quote Originally Posted by testguy View Post
    This is an excellent point. It cant be emphasized enough that when taking the practice exam its important to focus on the subject matter rather than the actual question and answer. We are looking into implementing a similar feature that stops showing you questions after answering them correctly a certain number of times. This way users who frequently take exams will continue to see fresh questions in subsequent exams.
    Yes, im about 2 months out from taking my level 4 test. trying to determine how to best spend my study time...im using old test questions as a starting point as where to begin digging deeper.

  2. #22
  3. testguy's Avatar
    testguy is offline Administrator Administrator
    Join Date
    Apr 2010
    Location
    United States
    Posts
    558
    Reputation
    Quote Originally Posted by ddd675 View Post
    7. A primary injection is to be performed on a transformer 138kV/25kV, 2500kva, 8%Z using a 480V generator connected to the high side with the low side grounded. The expected current in the high side is?
    Discussion for this question has been combined into a single thread -> https://testguy.net/threads/6409-Tra...ng-Calculation

  4. #23
  5. testguy's Avatar
    testguy is offline Administrator Administrator
    Join Date
    Apr 2010
    Location
    United States
    Posts
    558
    Reputation
    Quote Originally Posted by ddd675 View Post
    18. Two parallel feeder cables with individual 400:5 CT’s per parallel run are connected to one overcurrent relay per phase. The proper connection would be:
    a. Parallel additive with relay set to 800:5
    b. Parallel subtractive with relay set to 800:5
    c. Series additive with relay set to 400:5
    d. Series subtractive with relay set to 400:5
    Discussion for this question has been combined into a single thread -> https://testguy.net/threads/5105-Pro...-parallel-CT-s

  6. #24
  7. testguy's Avatar
    testguy is offline Administrator Administrator
    Join Date
    Apr 2010
    Location
    United States
    Posts
    558
    Reputation
    Quote Originally Posted by ddd675 View Post
    29. According to ANSI a newly installed battery bank should be load tested after:
    a. 1 year
    b. 2 years
    c. 4 years
    d. 5 years
    Discussion for this question has been combined into a single thread -> https://testguy.net/threads/6411-Loa...SI-requirement

  8. #25
  9. testguy's Avatar
    testguy is offline Administrator Administrator
    Join Date
    Apr 2010
    Location
    United States
    Posts
    558
    Reputation
    Quote Originally Posted by ddd675 View Post
    11. Two 1mH inductors are connected in parallel and in series with two 45uF capacitors connected in parallel. What is the total impedance of the circuit?
    Discussion for this question has been combined into a single thread -> https://testguy.net/threads/6412-Imp...lel-capacitors

  10. #26
  11. testguy's Avatar
    testguy is offline Administrator Administrator
    Join Date
    Apr 2010
    Location
    United States
    Posts
    558
    Reputation

    What gas would indicate partial discharge?

    Quote Originally Posted by ddd675 View Post
    10. In insulating oil, what gas would indicate partial discharge in the oil?
    Discussion for this question has been combined into a single thread -> https://testguy.net/threads/6413-Wha...scharge-in-oil

  12. #27
  13. test11's Avatar
    test11 is offline
    There can be only one!
    Member
    Join Date
    Mar 2017
    Location
    A hotel near you
    Posts
    38
    Reputation
    I found a list of some tolerances for belleville free-height. However, I am unsure what class fastener is usually used for electrical installations.
    Click image for larger version. 

Name:	Capture.PNG 
Views:	1 
Size:	5.3 KB 
ID:	433

  14. #28
  15. Join Date
    Feb 2018
    Posts
    11
    Reputation
    Quote Originally Posted by ddd675 View Post
    I wrote my NETA 4 test today... and failed. Here are some tips.
    Don't waste your time reading the NETA study material that they give you. I went through it all and did all the Tech Quizzes.... I don't think anything I studied was on the test. NETA updated the exam but didn't update any of the study material. Some of it is outdated and wrong as well.

    The study material focuses on Approach Boundaries, testing levels, expected results, NETA ATS & MTS info etc. NONE OF THIS WAS ON THE EXAM.

    Here are some of the questions I could remember:

    1. What kind of test do you perform on a fibre optic cable?
    a. Time domain reflectometry
    b. Light domain reflectometry

    2. What test value would you use while testing fibre optic cable?
    a. dBs

    3. At what elevation do ohm readings get effected?
    a. 1000m

    4. When testing insulation resistance on a MV Motors, at what voltage does it become ambiguous?

    5. On a main incoming of a 480V switchgear, what class powermeter should be installed?
    a. II
    b. III
    c. IV
    d. V

    6. A DCS is sending an auto speed signal for 30HZ via a 0-20mA transducer. The VFD is only outputting 1-3HZ. The mA measured by a mutimeter at the VFD is 10mA. What is the likely issue?
    a. High resistance in Auto Speed circuit?
    b. AC Component on DC signal

    7. A primary injection is to be performed on a transformer 138kV/25kV, 2500kva, 8%Z using a 480V generator connected to the high side with the low side grounded. The expected current in the high side is?

    8. A harmonic filter bank consists of a capacitor bank at XXuF and XXXmH. Which harmonic is this bank eliminating?

    9. According to ANSI Standards if you can not physically place a lock on a device what extra step needs to be taken to ensure safety.

    10. In insulating oil, what gas would indicate partial discharge in the oil?

    11. Two 1mH inductors are connected in parallel and in series with two 45uF capacitors connected in parallel. What is the total impedance of the circuit?

    12. There is 60 amps measured on the line of a delta transformer secondary. How many amps are in the delta?

    13. Two loads are connected to the same soure. Load 1: 1250KVA @ 0.85PF. Load 2: 600KW, 300KVAR. What is the combined load in KVA & PF.

    14. What is meant by double insulation?

    15. In a 480V solidly grounded system you must _________.
    a. Have automatic ground fault tripping
    b. Not have automatic ground fault tripping

    16. Which SCADA communication is only appropriate for short distances?
    a. RS232
    b. RS485
    c. CAT6
    d. Fibre

    17. A battery bank has batteries where the terminals are bulged and the seals broken. This is likely from:
    a. Improper charging
    b. Increasing plate growth
    c. Decreasing plate growth

    18. Two parallel feeder cables with individual 400:5 CT’s per parallel run are connected to one overcurrent relay per phase. The proper connection would be:
    a. Parallel additive with relay set to 800:5
    b. Parallel subtractive with relay set to 800:5
    c. Series additive with relay set to 400:5
    d. Series subtractive with relay set to 400:5

    19. A substation has zone ground fault protection. Which statement is true?
    a. The main will trip before the feeder breakers
    b. The feeder breakers send a block to the main and tie so they don’t trip
    c. The feeder breakers send a block the main and tie so they don’t trip until their designated tripping time.
    d. The main will trip and block tripping to the other side of the bus

    20. Before using a ground and test device you must perform what test every time before use?

    21. Which statement is true about a DCS System?
    a. Replaces many electromechanical devices

    22. A CT circuit with a CT resistance of 15mohm goes to a SEL-751 (.27VA @ 5A) through 125ft of #12 SIS (.988 ohms per 100ft). What is the appropriate CT class?
    a. C10
    b. C50
    c. C100
    d. C200

    23. What is the IEC 61850 naming structure?

    24. What is true about Natural esters oil?
    a. Cannot be mixed with mineral oil
    b. Has a higher PF than mineral oil

    25. What would a reactor placed at the end of a long transmission line be for?

    26. What is a wavetrap for?

    27. A DC drive with a high carrier frequency could cause issues with
    a. AC ripple
    b. Pulse width modulation

    28. What kind of fault on a transformer is shown on the given waveform?
    a. B to ground internal
    b. Single phase to ground on high side

    29. According to ANSI a newly installed battery bank should be load tested after:
    a. 1 year
    b. 2 years
    c. 4 years
    d. 5 years

    30. Three single phase transformers feed a load and one faults. Connected in open delta how much load can the 2 units support?
    a. 57.7%

    31. While testing a 100KVAR 480V 3 phase wye connected capacitor. What would the expected uF be across A-B terminals.
    I took neta 3 and failed but I was asked few questions from this post. Thanks

  16. #29
  17. southbury's Avatar
    southbury is offline
    Neta 4 Tech
    Junior Member
    Join Date
    Jul 2017
    Posts
    14
    Reputation
    The dependency on sites like Test Guy and Old Neta quizes is a false assumption.

    Instead these are Tools to help you understand areas where you are weak.
    Passing quizes and tests and feeling good about the scores are not the goal.

    Concentrated on the 10-25% you got wrong.
    These are your weak points. Areas of Knowledge you are lacking in. ( accept it)
    Find someone to explain these topics, usually they are eager to teach.
    I have had the luck of many teachers, I repay them in my apprentices every day. ( Every one will be a better test technician then me)
    Last edited by southbury; September 5, 2020 at 10:12 PM.

  18. #30
  19. Join Date
    Apr 2015
    Location
    Escondido, CA
    Posts
    3
    Reputation
    10. In insulating oil, what gas would indicate partial discharge in the oil?
    Hydrogen Gas is what is generated by Partial Discharge in Oil

Page 3 of 4 FirstFirst 1234 LastLast
Subscribe

Share this thread

Related Topics

  1. NETA 4 exam questions I am unsure about
    By mmacdonell in forum NETA Level 4 Exam
    Replies: 2
    Last Post: August 6, 2021, 07:15 AM
  2. Why so few questions for NETA 4 exam?
    By mmacdonell in forum NETA Level 4 Exam
    Replies: 3
    Last Post: February 10, 2020, 12:14 PM
  3. Questions and Topics I Remember From The NETA 2 Exam
    By rofo42 in forum NETA Level 2 Exam
    Replies: 8
    Last Post: November 22, 2019, 10:40 AM
  4. Questions from recent Level 2 exam (10/2017)
    By Tech1120 in forum NETA Level 2 Exam
    Replies: 10
    Last Post: July 5, 2018, 08:46 PM
  5. Neta 3 Exam pointers and questions
    By Zepold72 in forum NETA Level 3 Exam
    Replies: 13
    Last Post: April 29, 2016, 05:25 PM

Tags for this Thread

Follow us


Explore TestGuy


NETA Certification Training


NICET Electrical Power Testing


Help and Support




You are viewing the archives. Enjoy new features and join the conversation at wiki.testguy.net