×
Follow Us
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 39

NETA level 4 recommended study tips

 Jump to latest post
Page 2 of 4 FirstFirst 1234 LastLast
    #11
  1. Join Date
    Dec 2014
    Posts
    11
    Reputation

    NETA 4

    Quote Originally Posted by Larry5443 View Post
    Nine 150 kvar capacitors (three phase) are connected in a delta . What is the size in kvar of this bank
    Thanks Larry!!!

  2. #12
  3. Join Date
    Dec 2014
    Posts
    11
    Reputation

    NETA 4

    Quote Originally Posted by Larry5443 View Post
    Nine 150 kvar capacitors (three phase) are connected in a delta . What is the size in kvar of this bank
    Hi Larry, is the answer on this one 150Kvar assuming 3 150Kvar are in series and the 3 x 3 150Kvar are in parallel to form a delta bank?

  4. #13
  5. Join Date
    Aug 2014
    Location
    Capital City
    Posts
    74
    Reputation
    Quote Originally Posted by Larry5443 View Post
    RX diagram is used to describe the operating/restraining region of a distance relay horizontal axis represent ??
    X axis = R (Resistance)
    Y axis = X (Reactance)

  6. #14
  7. Join Date
    Aug 2014
    Location
    Capital City
    Posts
    74
    Reputation
    Quote Originally Posted by Larry5443 View Post
    An impedance relay with the MHO circle centered at the origin is said to be??
    Non-directional?

  8. #15
  9. Join Date
    Dec 2014
    Posts
    11
    Reputation

    NETA 4

    question: A phase sequence relay is set at 6 amps with ABC rotation. What would the pickup of this relay be?
    a. ACB at 6 Amps
    b. 3 phase at 18 amps
    c. 2 phases at 20.83 Amps
    d. None of the above
    e. Not enough info

  10. #16
  11. Join Date
    Dec 2014
    Posts
    11
    Reputation

    NETA 4 question

    What is NOT correct about synchronous motors?
    a. The excitation vs current curve is shaped like a V.
    b. They use a low starting voltage
    c. They use an Ammortisseur winding to start
    d. ?
    e. ?

  12. #17
  13. Join Date
    Aug 2014
    Location
    Capital City
    Posts
    74
    Reputation
    Thanks for these questions Ruel, are they from your recent examination?

  14. #18
  15. Join Date
    Dec 2014
    Posts
    11
    Reputation

    NETA 4

    Quote Originally Posted by veracon0700 View Post
    Thanks for these questions Ruel, are they from your recent examination?
    NO. this is the first time ill take the NETA 4. It came from my co-worker who just pass the exam last july.

  16. #19
  17. sepulveda7000 is offline
    NETA IV
    Junior Member
    Join Date
    Jan 2015
    Location
    Los Angeles, CA
    Posts
    2
    Reputation

    KVARS

    Quote Originally Posted by ruel guanzon View Post
    Hi Larry, is the answer on this one 150Kvar assuming 3 150Kvar are in series and the 3 x 3 150Kvar are in parallel to form a delta bank?



    150 X 9 = 1350 KVAR it does not matter if they are delta or wye connected. This question is in the electrical PE exam.
    Last edited by sepulveda7000; January 29, 2015 at 12:31 PM.

  18. #20
  19. Join Date
    Jan 2015
    Posts
    2
    Reputation

    Took the NETA Level 4 today

    I took the NETA 4 today. there are absolutely zero questions from this NETA 4 study guide that are on the actual test (at least the version i took). there are variations of the 4 just as there are of 2 and 3. I only had about 3 level 3 questions on the test. the remaining questions were challenging.

    Several distance relaying questions, several KWH standard questions, a few breaker tripping scenario questions, and a lot of power calculations. I also ran into several rotating machinery questions. A lot of these were very difficult for me as i am not well versed on the construction of older motors.

    Study all aspects of the topics listed above if you are scheduled to take this test.

Page 2 of 4 FirstFirst 1234 LastLast
Subscribe

Login or register to leave a reply!


Share this thread

Related Topics

  1. 18 study tips for the NETA Level 4 exam
    By Test Tech from DMV in forum NETA Level 4 Exam
    Replies: 8
    Last Post: September 12, 2017, 02:05 PM
  2. Recommended Industry Training?
    By tonym1069 in forum Electrical Testing Talk
    Replies: 3
    Last Post: September 16, 2016, 08:40 AM

Tags for this Thread

Follow us


Explore TestGuy


NETA Certification Training


NICET Electrical Power Testing


Help and Support