×
Follow Us
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Questions from recent Level 2 exam (10/2017)

 Jump to latest post
Page 1 of 2 12 LastLast
    #1
  1. Join Date
    Nov 2017
    Posts
    3
    Reputation

    Questions from recent Level 2 exam (10/2017)

    Here are some recent questions from the Level 2, they were given to me by a co-worker who took the exam in October.


    1. What connections are on a DLRO meter?
    A) 2 current outputs, 2 voltage outputs
    B) 2 current measurements, 2 voltage measurements
    C) 2 current measurements, 2 voltage outputs
    D) 2 current outputs, 2 voltage measurements


    2. One worker is standing 3ft away from an exposed live part and another is standing 6ft away. How much incident energy is the 6ft worker exposed to in comparison to the 3 ft worker?
    A) 1/2
    B) 1/16
    C) 1/4
    D) ????


    3. Given a 3-phase circuit with 250kvar and 480v, what is the current?


    4. Under normal operating conditions, in what state is a battery charger set to?
    A) Charging
    B) Float
    C) Equalizing
    D) ????


    5. Which instrument is used to locate a 15kV underground cable fault?
    A) DLRO
    B) Time/Motion Analizer
    C) Time domain reflectometer
    D) Insulation resistance tester


    6. Your pickup results are high on an electromechanical relay, what is likely the cause?
    A) Contacts are dirty
    B) Loose connections on case
    C) Spiral spring adjustment
    D) ???


    7. What grade bolt is this (given picture of a bolt head)
    A) Grade 1-2
    B) Grade 3
    C) Grade 5
    D) Grade 8



    Stuff to know:


    Protective ground sizes and functionality
    LOTO process
    Confined space
    Power triangle and power factor calculations
    Fuses
    Grounding principles
    Use of meters and the leads associated
    Contact resistance and how it works
    One lines and symbols
    Relays and symbols associated

  2. #2
  3. Rdhorn is offline Junior Member
    Join Date
    Dec 2016
    Posts
    1
    Reputation
    Here are some of the answers, please feel free to add or contradict my answers


    Quote Originally Posted by Tech1120 View Post
    Here are some recent questions from the Level 2, they were given to me by a co-worker who took the exam in October.


    1. What connections are on a DLRO meter?
    A) 2 current outputs, 2 voltage outputs
    B) 2 current measurements, 2 voltage measurements
    C) 2 current measurements, 2 voltage outputs
    D) 2 current outputs, 2 voltage measurements

    D)

    2. One worker is standing 3ft away from an exposed live part and another is standing 6ft away. How much incident energy is the 6ft worker exposed to in comparison to the 3 ft worker?
    A) 1/2
    B) 1/16
    C) 1/4
    D) ????

    I don't know. I would have to say 1/2 or 1/4 but it would be a guess

    3. Given a 3-phase circuit with 250kvar and 480v, what is the current?

    I don't know if I can answer that with just this information. I would be curious to hear someone else answer


    4. Under normal operating conditions, in what state is a battery charger set to?
    A) Charging
    B) Float
    C) Equalizing
    D) ????

    B) Float

    5. Which instrument is used to locate a 15kV underground cable fault?
    A) DLRO
    B) Time/Motion Analizer
    C) Time domain reflectometer
    D) Insulation resistance tester

    C) Time domain relectometer

    6. Your pickup results are high on an electromechanical relay, what is likely the cause?
    A) Contacts are dirty
    B) Loose connections on case
    C) Spiral spring adjustment
    D) ???

    I don't know

    7. What grade bolt is this (given picture of a bolt head)
    A) Grade 1-2
    B) Grade 3
    C) Grade 5
    D) Grade 8

    No dashes is 2, add plus for the other grades

    Stuff to know:


    Protective ground sizes and functionality
    LOTO process
    Confined space
    Power triangle and power factor calculations
    Fuses
    Grounding principles
    Use of meters and the leads associated
    Contact resistance and how it works
    One lines and symbols
    Relays and symbols associated

  4. #3
  5. dvaldez is offline Junior Member Pro Subscriber
    Join Date
    Dec 2017
    Posts
    1
    Reputation
    Quote Originally Posted by Rdhorn View Post
    Here are some of the answers, please feel free to add or contradict my answers
    Anybody else have anymore questions from the exam?

  6. #4
  7. NoWorldOrder is offline Junior Member Pro Subscriber
    Join Date
    Feb 2017
    Posts
    4
    Reputation
    6. Your pickup results are high on an electromechanical relay, what is likely the cause?
    A) Contacts are dirty
    B) Loose connections on case
    C) Spiral spring adjustment
    D) ???

    Tightening spiral spring increases pickup, loosening the spring will decrease pickup

  8. #5
  9. Join Date
    Nov 2017
    Posts
    3
    Reputation
    What is this reading

    Click image for larger version. 

Name:	dlro-reading-neta-level-2-question.png 
Views:	597 
Size:	8.5 KB 
ID:	237

    A phase
    B phase
    A and C
    B and C

  10. #6
  11. Join Date
    Nov 2017
    Posts
    3
    Reputation
    Quote Originally Posted by Rdhorn View Post
    3. Given a 3-phase circuit with 250kvar and 480v, what is the current?

    I don't know if I can answer that with just this information. I would be curious to hear someone else answer
    I did some research and found the equation I = kVAR / (V*1.732) but I don't have the answer choices to check my answer 0.30 A

  12. #7
  13. NoWorldOrder is offline Junior Member Pro Subscriber
    Join Date
    Feb 2017
    Posts
    4
    Reputation
    Quote Originally Posted by Tech1120 View Post
    What is this reading

    Click image for larger version. 

Name:	dlro-reading-neta-level-2-question.png 
Views:	597 
Size:	8.5 KB 
ID:	237

    A phase
    B phase
    A and C
    B and C
    A phase

  14. #8
  15. Join Date
    Apr 2018
    Location
    Michigan
    Posts
    40
    Reputation
    Quote Originally Posted by Tech1120 View Post
    I did some research and found the equation I = kVAR / (V*1.732) but I don't have the answer choices to check my answer 0.30 A
    250,000/(480*1.732)=~300A

  16. #9
  17. Join Date
    Apr 2018
    Location
    Michigan
    Posts
    40
    Reputation
    Quote Originally Posted by Tech1120 View Post
    What is this reading

    Click image for larger version. 

Name:	dlro-reading-neta-level-2-question.png 
Views:	597 
Size:	8.5 KB 
ID:	237

    A phase
    B phase
    A and C
    B and C
    It's reading a, because the DLRO should push the rated amps through Phase C, and with no amp on the P2 lead through phase B resistance, the reading across Phase A would be unaffected.

  18. #10
  19. SecondGen's Avatar
    SecondGen is offline
    I push buttons.
    NETA Level III Pro Subscriber
    Join Date
    Jan 2014
    Location
    United States
    Posts
    508
    Reputation
    Quote Originally Posted by Tech1120 View Post
    What is this reading

    Click image for larger version. 

Name:	dlro-reading-neta-level-2-question.png 
Views:	597 
Size:	8.5 KB 
ID:	237

    A phase
    B phase
    A and C
    B and C
    A phase. If anyone is having trouble with this one, just look at the test leads carefully and you will notice that B and C bus are simply used as extensions of the test leads.

Page 1 of 2 12 LastLast
Subscribe

Share this thread

Related Topics

  1. Replies: 4
    Last Post: October 31, 2021, 06:02 AM
  2. NETA 4 Exam Questions 1/2017
    By ddd675 in forum NETA Level 4 Exam
    Replies: 31
    Last Post: December 8, 2020, 08:42 AM
  3. Tech Quiz Updates for 2017
    By testguy in forum News and Announcements
    Replies: 1
    Last Post: September 5, 2017, 06:24 PM
  4. Neta 3 Exam pointers and questions
    By Zepold72 in forum NETA Level 3 Exam
    Replies: 13
    Last Post: April 29, 2016, 05:25 PM
  5. Official NETA Level 2 Exam Most Missed Questions, Spring 2000
    By SecondGen in forum NETA Level 2 Exam
    Replies: 6
    Last Post: March 16, 2016, 08:18 PM
Follow us


Explore TestGuy


NETA Certification Training


NICET Electrical Power Testing


Help and Support




You are viewing the archives. Enjoy new features and join the conversation at wiki.testguy.net