Test Question--High Current Injection
I disagree that my answer was wrong. The question:
7. To test the long time delay function of a breaker which is set for 1000 amps ___________ test current is needed.
From memory answers were:
d. Need more information
I chose D, because both B and C could be correct. I also wondered if it was a trick question with the wording. LTD is set in time, they don't specify that 1000 amps is the LT pickup. My answer was marked wrong. If LTD was always to be tested at 3x, then we wouldn't need TCC's, just a standard range. I've tested a 4000a breaker at 8000 to keep a test set from overheating. It would take a lot of time, but I could test the long time function of a 1000a pickup at 1500 amps.
I dislike that in some questions, tricks are tricks, yet in others, the generic standard seems to be the right answer.
Anyone else stumble on this?
It would be C
You could test the pickup value at 1000, but the question ask for time delay which would be 3x the rated current which would be the answer C, 3000.
You could test the time delay at 3x. You could also test it at 1.5x, 6x, 10x... We have TCC's to chart every level of current flow, 3x is just a standard that's been used for convenience. NETA doesn't require 3x, nor does any other governing body that I've seen.
Originally Posted by Mcfly89
Just because a practice is common doesn't mean it's a rule.
This was talked about at the Neta conference and it was agreed that there is no standard for this type of question.
Originally Posted by alexlounsbury
By BRAD2121 in forum NETA Level 3 Exam
Last Post: January 30, 2017, 01:55 PM
By mask1290 in forum Electrical Testing Talk
Last Post: January 24, 2017, 05:38 PM
By mkennedyShermco in forum NETA Level 4 Exam
Last Post: July 20, 2016, 12:36 PM
By Larry5443 in forum Electrical Testing Talk
Last Post: July 21, 2015, 10:52 PM
By Larry5441 in forum NETA Level 4 Exam
Last Post: January 24, 2015, 12:34 PM