Results 1 to 7 of 7

Official NETA Level 2 Exam Most Missed Questions, Spring 2000

    #1
  1. SecondGen's Avatar
    SecondGen is offline
    I push buttons.
    NETA Level III
    Join Date
    Jan 2014
    Location
    United States
    Posts
    163
    Reputation

    Official NETA Level 2 Exam Most Missed Questions, Spring 2000

    Review the procedure for nulling the meter on a transformer turns ratio test set. 81% of technicians have missed this question.

    Understand accuracy ratings for metering. Particularly, know how to calculate accuracy at points other than full scale. 74% of technicians do not understand these concepts.

    Know the relative phase angle for a circuit having capacitive reactance and resistance. This question requires no calculation, just an understanding of the relative phase angles. 74% of technicians miss a question on this topic.

    Study up on confined space. 67% of technicians do not know who keeps cancelled entry permits for a year.

    Understand battery chargers and their role in a substation. In a correctly designed system, the charger must supply all load including indicating lamps and relay control power as well as maintain battery voltage. 63% of technicians believe that the charger provides current to maintain battery voltage and absolutely nothing else.

    Research neutralization numbers for transformer oil acidity tests. 63% of technicians miss a question on this topic.


    Note: 73 technicians took the NETA Level 2 exam in the spring of 2000. 29 passed.

    Source: Official NETA internal memo from Rod Hageman, Technical Exam Chair to NETA Accredited Representatives dated July 21, 2000. Re: Spring 2000 Level II Certification Exam.
    Reply to Post • 
    Last edited by SecondGen; December 1, 2015 at 01:08 PM.

  2. #2
  3. Join Date
    Jun 2015
    Posts
    14
    Reputation
    This is a good help! Thanks for all the help you give everyone on this site!
    Reply to Post • 

  4. #3
  5. Join Date
    Apr 2014
    Posts
    61
    Reputation
    Quote Originally Posted by SecondGen View Post
    Review the procedure for nulling the meter on a transformer turns ratio test set. 81% of technicians have missed this question.
    Help with this, can someone explain the procedure? Is it still relevant 15 years later?
    Reply to Post • 

  6. #4
  7. prime_mover's Avatar
    prime_mover is offline
    "The whole problem with the world is that fools an
    Junior Member
    Join Date
    Nov 2015
    Location
    Sac, CA
    Posts
    5
    Reputation

    Null the meter on TTR test

    Quote Originally Posted by cjones09 View Post
    Help with this, can someone explain the procedure? Is it still relevant 15 years later?
    Could you give some reference on this? Manufacturer maybe?
    Reply to Post • 

  8. #5
  9. SecondGen's Avatar
    SecondGen is offline
    I push buttons.
    NETA Level III
    Join Date
    Jan 2014
    Location
    United States
    Posts
    163
    Reputation
    Quote Originally Posted by cjones09 View Post
    Help with this, can someone explain the procedure? Is it still relevant 15 years later?
    Not sure if this question is still on the NETA exam or not, but it would definitley be a good thing to know to better understand the theory behind turns-ratio tests. All of the following comes from an old windup TTR instruction book from 1951!

    Name:  ttr-simple-diagram.jpg
Views: 334
Size:  91.9 KB

    Null Check: Adjust the dials to zero. Connect H1 clip to H2. Be sure X clamp screws do not touch anvils. Also see that the clamps to not touch each other.

    Crank the generator so that the voltmeter, V reads 8 volts. Observe the detector, D. The pointer should rest exactly on the null mark at the center of the scale.

    If necessary, adjust the meter to zero with a screwdriver while cranking at 8 volts. Stop cranking and again observe the detector. The pointer may rest slightly off zero. Should it be more than a sixteenth of an inch off, more troubleshooting is required.


    Nothin' to it! However, there are two other self check tests you should know: Zero ratio check and Unity Ratio Check.

    I found a PDF copy of the manual you can download here: http://exodus.poly.edu/~kurt/manuals...el%203-TTR.pdf for anyone who wants to read up on it. You can find the troubleshooting procedures on page 55.
    Reply to Post • 

  10. #6
  11. dnigra is offline Junior Member
    Join Date
    Jan 2016
    Location
    NJ
    Posts
    18
    Reputation
    Quote Originally Posted by SecondGen View Post
    Review the procedure for nulling the meter on a transformer turns ratio test set. 81% of technicians have missed this question.

    Understand accuracy ratings for metering. Particularly, know how to calculate accuracy at points other than full scale. 74% of technicians do not understand these concepts.

    Know the relative phase angle for a circuit having capacitive reactance and resistance. This question requires no calculation, just an understanding of the relative phase angles. 74% of technicians miss a question on this topic.

    Study up on confined space. 67% of technicians do not know who keeps cancelled entry permits for a year.

    Understand battery chargers and their role in a substation. In a correctly designed system, the charger must supply all load including indicating lamps and relay control power as well as maintain battery voltage. 63% of technicians believe that the charger provides current to maintain battery voltage and absolutely nothing else.

    Research neutralization numbers for transformer oil acidity tests. 63% of technicians miss a question on this topic.


    Note: 73 technicians took the NETA Level 2 exam in the spring of 2000. 29 passed.
    good stuff. thanks
    Reply to Post • 

  12. #7
  13. Join Date
    Apr 2015
    Posts
    6
    Reputation
    I've only ever used a wind up TTR. That's the one they make us new guys use! Great for learning the mechanical aspect.
    Reply to Post • 

Login or register to leave a reply!



Related Topics

  1. NETA Level 3 Most Missed Questions, Spring 2000
    By SecondGen in forum NETA Level 3 Exam
    Replies: 1
    Last Post: February 2, 2016, 01:41 PM
  2. Official NETA Level 3 Exam Category List, Spring 2000
    By SecondGen in forum NETA Level 3 Exam
    Replies: 1
    Last Post: July 21, 2015, 02:47 PM
  3. NETA Level 4 Category List, Spring 2000
    By SecondGen in forum NETA Level 4 Exam
    Replies: 0
    Last Post: June 1, 2015, 06:03 PM
  4. NETA Level 2 Category List, Spring 2000
    By SecondGen in forum NETA Level 2 Exam
    Replies: 0
    Last Post: June 1, 2015, 05:12 PM
  5. NETA Level 4 Most Missed Question Subjects, Spring 2000
    By SecondGen in forum NETA Level 4 Exam
    Replies: 0
    Last Post: June 1, 2015, 04:44 PM

Tags for this Thread

Search TestGuy
   Tag Cloud   Advanced Search
Follow us


Explore TestGuy


NETA Certification Training


Help and Support