• NFPA 70E: Who is a "Qualified Worker?"

    Advertisement

    It is important to note that a person can be considered qualified with respect to certain equipment and methods, but still be unqualified in other situations.

    Working with electrical power has always been a risky business, and potential hazards - including arc flash - are on the rise.

    Because of the severe and often devastating consequences of arc flash incidents (which claim at least one life every workday), the NFPA is using several strategies to facilitate worker safety starting with the requirement that workers be properly qualified for the work being performed.

    The NFPA 70E 2012 definition of a qualified person is: "one who has skills and knowledge related to the construction and operation of the electrical equipment and installations and has received safety training to recognize and avoid the hazards involved.”

    Electrical workers who meet this definition of a “qualified electrical worker” will be able to:

    • Determine the nominal voltage for the equipment or system
    • Determine the required approach distances for electrical shock and burn hazards
    • Distinguish exposed energized conductors and circuits from other parts of the equipment
    • Properly select, care for and use the appropriate personal protective equipment for both shock protection and arc flash protection

    Being properly qualified is just one of the safe work strategies found in NFPA-70E. Other safe work requirements include performing work under an electrically safe work condition whenever it is feasible to do so, and following prescribed safe work practices when creating an electrically safe work condition is not feasible.

    These prescribed safe work practices may include:

    • Restricting access to energized electrical equipment with barricades and signs
    • Establishing various approach boundaries
    • Requiring specific PPE for electric shock and arc flash hazards, and job planning requirements, which include hazard analysis, job safety briefings and the use of energized work permits.

    It is important to note that a person can be considered qualified with respect to certain equipment and methods, but still be unqualified in other situations.

    2015 Updates to NFPA 70E Qualified Person Requirements

    Being properly qualified is just one of the safe work strategies found in NFPA-70E.

    The 2015 version of NFPA 70E adds the requirement that a qualified person shall demonstrate the ability to use the following:

    • Special precautionary techniques
    • PPE including arc flash suits
    • Insulating and shielding materials
    • Insulated tools and test equipment

    The new standard also adds that qualified electrical workers permitted to work within the limited approach boundary of exposed energized electrical conductors and circuit parts must have additional training in minimum approach distances to exposed parts operating at 50 volts or more.

    Employees who respond to medical emergencies must also participate in refresher training per the new standard.

    NFPA 70E is the standard that addresses employee workplace electrical safety requirements, focusing on practical safeguards that also allow workers to be productive within their job functions.

    Although OSHA, ASTM, IEEE and other industry standards provide guidelines for performance, NFPA 70E specifically addresses work practices and is widely considered as the de-facto standard for Electrical Safety in the Workplace.

    References

    Share this page

    Comments

    Be the first to comment.

Search TestGuy
   Tag Cloud   Advanced Search
Follow us


Explore TestGuy


NETA Certification Training


Help and Support